About us

For information/ Topics Related to Engineering, Science, Technology, and other Thoughtful logics.

Comments

Post a Comment

Popular posts from this blog

Direct Contouring, method of Contour Surveying.

Image
Direct Contouring Surveying :- It consists in finding vertical and horizontal controls of the points which lie on the selected contour line. For vertical control levelling instrument is commonly used. A level is set on a commanding position in the area after taking fly levels from the nearby bench mark. The plane of collimation/height of instrument is found and the required staff reading for a contour line is calculated. Procedure of Contouring :- 1. B.M (RL) + B.S = H.I 2. H.I - F.S = R.L (of that point where staff is held) Where, B.M = Bench mark B.S = Back site reading H.I = Height of Instrument F.S = Fore site reading R .L = Reduced level Fig. 1 Example :- Temporary B.M = 7.34 M B.M (R.L) + B.S = H.I,  However, H.I = 7.34 + 1.241= 8.581 M And,  H.I - F.S = R.L     R.L¹ = 8.581 - 0.625 = 7.956 M     R.L² = 8.581- 0.581 = 8.0 M     R.L³ = 8.581 - 0.543 = 8.038 M ...
Read more

EXPIRY DATE OF LPG CYLINDER

Image
Expiry date of LPG Cylinder - The date of Expiry of LPG cylinder may be denoted by class A, B, C and D with numbers which shows the year of expiry. For example - if code written inside the ring plate as C-17 it mean LPG cylinder expire bewteen July 2017 to September 2017 etc. Hence check out your cylinder ! 😇 Thank you.
Read more